Product characteristics
♦ Full metal frame structure, narrow bezel design;
♦ Adopt LED LCD A gauge screen;
♦ Zero-lamination process, low parallax smooth writing, display more excellent;
♦ Mohs 7H explosion-proof glass screen protection;
♦ AG anti-glare tempered glass;
♦ Support light-sensitive adjustment of brightness, display more eye protection;
♦ 4K UHD display, support full-channel 4K UI display;
♦ Two front USB2.0, support switching with the channel, front HDMI, TYPE-C interface;
♦ ± lmm high-precision infrared touch technology;
♦ Support 2.4G/5G dual-frequency wifi, AP + STA working mode;
♦ Support 5G wireless screen transmission function;
display parameter
| size |
65 inches |
| model number |
ISEW-650 |
| Screen Type |
IPS |
| response time |
8ms |
| aspect ratio |
16:9 |
| Display Size H*Vmm |
1429.7 * 804.7 |
| resolution |
3840(H)x2160(V) |
| refresh rate |
60Hz |
| coloration |
1.07B(10bit) |
| color gamut NTSC(Typ) |
72% |
| contrast (Typ) |
1200:1 |
| visual Angle |
178° (H/V) |
| Type of tempered glass |
Surface with AG anti-glare treatment, surface hardness 7H |
| Backlight Type |
DLED |
| screen brightness(Typ) |
350cd/m²±10%(typical value of nine-point center) |
| longevity |
≥30000 hours |
Matching different liquid crystal glass models, the peak brightness of the whole machine will be different, the data identified in this specification is only for reference!
operating system
| system version |
Android 11.0 |
| chip type |
T982 |
| RAM |
4G |
| ROM |
32G |
| CPU |
Quad-core A55 |
| GPU |
Mail-G52 |
| System support language |
Simplified Chinese, English, Arabic, Spanish, French, Italian, Japanese, Portuguese, Russian, German, Vietnamese, Polish, Thai, Kazakh, Danish, Persian, Czech, Hindi, Malay, Dutch, Finnish, Swedish, Hebrew |
touch parameter
| Recognition principle |
infrared identification |
| input mode |
Passive infrared pen |
| Touch accuracy |
±lmm (more than 90% of the touch area) |
| Touch count |
Windows supports 20 points by default, and Android supports 10 points by default |
| Minimum identifier |
Diameter ≥2.5mm |
| Output coordinate |
32768(W)x32768(D) |
| response time |
≤9ms |
| OS Support |
Windows10/Windows8 /Windows7/Android |
loudspeaker
| sound track |
2.0 |
| trumpet |
2x10W |
electric parameter
| power input |
AC 180-240V~50/60Hz |
| Power consumption (Standard mode without OPS) |
≤250W |
| Standby power consumption (without external devices) |
≤0.5W |
OPS module load output
| OPS Supply Voltage |
17-21VDC |
| Rated load power |
Maximum 95W (19V-5A) |
| Supported interface type |
China OPS-C standard 80-pin interface |
| Compatible case size |
L196*W180*H33~42mm(recommended height 33mm) does not support the European standard OPS box |
| OPS image resolution |
The maximum output is 3840*2160p@60Hz |
I/O Interface
| front interface |
| HDMI IN |
1 |
| USB 3.0 |
2 |
| USB Type-C |
1 |
| TOUCH 2.0 |
1 |
| Rear Onboard Interface |
| HDMI IN |
2 |
| USB 2.0 |
1 |
| USB 3.0 |
1 |
| TOUCH OUT 2.0 |
1 |
| (Mini) LINE OUT |
1 |
| OPTICAL OUT |
1 |
| RS232 |
1 |
| RJ45 IN |
1 |
| (Mini) MIC IN |
1 |
| VGA IN |
1 |
| PC AUDIO in |
1 |
Size and weight
| size |
65 inches |
| Machine size (length x width x thickness) |
L1483.2x H904.7x W87.1 mm |
| Package size (length x width x thickness) |
L1620x H1040 x W210 mm |
| Whole machine + wall hanging thickness |
112.1mm |
| Wall mount dimensions (mm) |
L640 x H500 x T25 |
| VESA Hole specification (length x width) |
500mm*400mm |
| Wall mounting screws specifications |
M8x25mm x4pcs |
| net weight (KG) |
34.4 |
| gross weight (KG) |
44.2 |
accessories
| power cord |
*1 |
| handwriting pen |
*1 |
| wall bracket |
*1 |
operation environment
| operating temperature |
0ºC-40ºC |
| operating humidity |
20%~80%RH |
| storage temperature |
-10ºC-60ºC |
| storage Humidity |
10%~90%RH |
| operational height |
below 5000 meters |
wifi module
| wireless module |
2.4G/5G |
| bluetooth |
BT5.1 |
Optional Modules
| OPS Module Models |
I3/I5/I7 (optional according to customer's actual needs) |
Price of optional accessories
| Wireless Screen Thrower |
US $60 |
| Smart Page Turner |
US $30 |
| Ordinary bracket |
US $65 |
| Herringbone bracket |
US $100 |
| OPS(6th generation i5 4G 128G Support wifi) |
US $200 |
disclaimer
Subject to the product configuration and manufacturing process, the actual body size / body weight may vary, please prevail in kind.
The product pictures in this specification are for illustrative purposes only, the actual product effects (including but not limited to appearance, color, size) may vary slightly, please prevail in kind.
In order to provide accurate specifications as far as possible, may be real-time adjustments and revisions to the text of this specification, picture effects and other content, in order to match the actual product performance, specifications and other information.
In the event that such modifications and adjustments are necessary, no special notice will be given.
note
1. This caution should be read carefully before handling and using the product.
2. All warning signs in the product and product usage guide should be followed.
3. The keys on the panel are unipolar switches, which are pressed to switch between on or standby states when the power is turned on; the unit itself has an all-pole switch, which is used as a device to disconnect the power supply.
4. When abnormal sound or odor occurs in the machine, please turn off the power and unplug it immediately, and when it is confirmed to be abnormal, do not continue to use it, and ask the product maintenance personnel to overhaul it.
5. If you don't use the all-in-one machine for a long time, turn off the power of the all-in-one machine and unplug it from the power supply.
6. Flammable and explosive substances, candles, electric stoves, light bulbs, etc. can not be placed on the machine and close to the machine to avoid accidents.
7. Beware of liquid, metal into the body of the integrated machine, if any liquid, metal fell into the machine, must not be opened again to use, should be as soon as possible to ask a professional to deal with.
8. Can not use chemical reagents to wipe the machine, solvents may deteriorate the shell, as well as damage its painted surface. If there is dust and dirt, you should turn off the all-in-one machine ten minutes after wringing out a damp cloth and then wipe. The display can be gently wiped with a clean soft cloth. Unplug the MFP from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
9. Pay attention to water and moisture. Do not use the product in or near areas where water is present, such as: baths, lavatory trays, kitchens, sinks, laundry tubs, wet basements or near swimming pools.
10. The appliance should not be subjected to dripping or splashing, and no liquid-filled items such as vases should be placed on the appliance.
11. The plug should be easily plugged and unplugged for grounding. This product is equipped with a three-wire grounding-type plug that has a grounding pin and can only be plugged into a grounding-type electrical outlet.
12. Do not place the product on an unstable cart, shelf, tripod, bracket or table, as this may cause the All-in-One to tip over. When this product is placed on a cart, care should be taken when moving it. Fast and sharp stops, excessive force or uneven surfaces may cause the cart and the All-in-One to tip over.
13. The slots and openings in the unit provide ventilation to ensure reliable operation of the product and to prevent overheating. Ventilation holes should not be covered with items such as newspapers, tablecloths and curtains to prevent ventilation. For adequate ventilation, ensure that there is some clearance around the product.
14. This product should only be powered by the type of power supply and supply voltage indicated on the label. If you are unsure of the type and voltage of the power supply in your home, please contact the product distributor or your local power supply company.
15. The power cable in the accessories of this product is a three-plug power cord (with grounding protection), please make sure that the grounding terminal of the wall outlet is well grounded when installing. The power cable wiring should avoid the channel to avoid being stepped on, and should also avoid being squeezed by other objects.
16.It is prohibited to push any type of debris into this product through any openings, otherwise they may come into contact with hazardous voltage points or protruding parts, which may result in fire or electric shock.
17.Do not service this product without authorization. Unauthorized opening or removal of the cover may expose you to dangerous voltages or other hazards. Contact the manufacturer's designated service personnel to handle any maintenance issues.
18. Installation of this product should follow the manufacturer's operating instructions and only use the manufacturer's recommended mounting accessories. 19. Wall mounting (if any) of this product is only applicable to normal concrete walls, solid walls, and wood-planked walls capable of withstanding more than three times the weight of the machine; for hanging or lifting of special walls (steel walls, hollow walls, and glass, marble, etc.) the manufacturer recommends that you The safety of hanging or lifting the product must be taken into account and the operation must be carried out only after ensuring that there are no errors. The installation of such special materials must be carried out by specialized personnel, and the manufacturer is not obliged to undertake such installation.
20. The exclamation mark on the rear nameplate is important: if there is a need to replace important safety components in maintenance (components with this symbol next to the components on the circuit board) must be replaced only with components specified in the safety test documents, if there is no replacement of the same components, please ask the manufacturer.
21. Class I equipment accessible conductive parts and output sockets of the protective earth should be reliably connected to the equipment in the protective earth terminal.
22. Nothing can be put over the ventilation holes of the device, such as tablecloths, meals, curtain fabrics, etc.
23.You cannot put any object that is burning (with a burning flame) on this unit, such as a burning candle.
24.When you want to move this appliance from a hot place to a cold place, warm it up sufficiently by turning on the power before operation.
25. In any situation where batteries may be used, if there is a danger of explosion if they are not replaced properly, they should only be replaced with batteries of the same or equivalent type. Batteries (packs or combinations) must not be exposed to environments such as sunlight, fire or similar excessive heat.
26. The disconnecting device of this product is the appliance coupler, the appliance coupler is located on the shell of the product, when the product is not in use, please unplug the power cord through the appliance coupler, and no other objects shall be placed near the appliance coupler, so as not to impede the disconnection of this product from the power supply.
27. Please make sure that the equipment is installed in a suitable location, such as mounted on the wall or hanging on the mobile bracket, mobile bracket using the manufacturer's recommended or specified specifications and models, and please install under the guidance of professionals.
28. Affected by the product configuration and manufacturing process, the actual body size / body weight and packaging or differences, please prevail in kind. The product images in this specification are for illustrative purposes only, the physical product effect (including but not limited to appearance, color, size, weight) may vary slightly, please prevail in kind. In order to provide accurate specifications as far as possible, may be real-time adjustments and revisions to the text of this specification, picture effects and other content, in order to match the actual product performance, specifications and other information.
Audited Supplier 
♦ Full metal frame structure, narrow bezel design;
){kind=link}
){kind=link}